Torq tec chopper 7’2”
Length : 7'2"
Volume : 47.5 L
Fin Setup : 2+1
Board code : 1021
Description
Dimension 7'2" x 21 1/4" x 2 3/4"
The Chopper is a versatile form that can be a cruisey ride when the conditions are right or go full throttle with a big open face.
The shape has been modified with more forward volume for a more flowing, forward trim style of surfing from the front half of the board and a little more flip in the tail rocker for tighter turns and aggressive surfing.
This board is very user-friendly and is appropriate for both pumping days and days with tiny waves.
It is possible to ride it as a glidey single fin, a 2+1, or a thruster with a 2+1 fin setup.
Starting at $25 per day
BOOK THIS BOARD
Check Availability
NOTE:
Periods that are already booked are greyed-out & will not be selectable on this calendar.
You can also use the Pickup/Return dates field to enter your rental period.
RENTAL AGREEMENT, TERMS & CONDITIONS
SurfBoard Rental Agreement
This agreement is entered between Surf Shop Maldives Partnership and the RENTEE named above hereinafter referred to as the "LESSEE", for the purpose of renting surfing gear and its related accessories.
Where the LESSEE agrees that:
Where the LESSEE agrees that:
- The rented items are in good condition and that he/she has examined the items to ensure that it is free from damage.
- To use the rented items with good care and responsibility and to store and maintain the rented items in a safe place away from direct sunlight during the rented period.
- To bear the cost of lost or damaged items as stated in this from, due any cause within the rental period with due consideration to the normal wear and tear.
- To store the rented items at the Airport’s Baggage Store Service, where LESEE fails to meet our representative to return the rented items by the end of the rental period. And to inform us about this by contacting +960 7797202 or by e-mailing info@surfinmaldives.com
Surfboard care
- Don’t Leave Your Surfboard in the Sun Surfboards exposed to the sun for long periods of time begin to fade and yellow. If your board gets too much intense, direct sunlight it will cause the board to overheat and delaminate. It can also cause the outer layer of the board and fiberglass to become weak and crack.
- If Your Surfboard Gets Dinged If a ding has cracked the outer layer of your board, then your board will no longer be watertight and we wouldn’t recommend you to surf on it, since it will soak up the foam inside and worsen the situation. If you wish to repair the ding by yourself, it is important to ensure that the board has dried-out sufficiently before you repair it. Use a suitable resin for the board construction type. Use the correct repair kit to repair your board, otherwise you could end up doing more damage than good. Do not use polyester resin on an epoxy surfboard. However, epoxy resin can be used in both types. If you do not have a repair kit, use duct tape to seal the ding or crack as a temporary measure.
- Foam Surfboards Foam / Foamie Surfboards are usually made from high density, closed cell foam with a slick surlyn base. As they are usually made from closed cell foam, they don’t take on water quickly. Use only foam surfboard repair kits for foamies. Do not use bodyboard or PU repair kits as these can melt and damage the internal foam of the board. Epoxy resin can be used, but will dry out leaving rough edges. We recommend patching the board with surfboard wax and then you can get back to surfing right away.
- Store Your Surfboard Properly Store your surfboard on a surfboard rack with soft padding or a flat surface where it won’t get stepped-on, knocked over, away from heat sources such as fireplaces & radiators, out of direct sunlight and secured properly from strong winds.
WHAT'S INCLUDED
Surfboard with Fins, Leash & Boardbag/Sock.
Lost or snapped
- If this board is lost or snapped, a fine of $500 will apply
Bag, Leash & fins
- Lost board bag: $80
- Lost leash: $50 (if snapped, bring both ends back then you don't have to pay)
- Lost fin: $100
Dings
- Small ding (dent or hole): $20
- Big ding (main crease, damaged finbox, hole >10cm): $50 per ding
