Softech
Showing all 5 results
-
Softech Lil Ripper
$ 389.10 – $ 486.38Wide in the hips and tail with a deep concave for extra lift in mushy conditions.
Size: 5’6″ / 6’0″
Dimensions: 5’6″ x 21 1/8” x 2 1/2”, 6’0″ x 21 7/8” x 2 7/8”
Core: Epoxy Core
Stringer: Single Stringer
Fin Setup: Tri (x3 FCS II Fin Setup)
Fin System: FCS II
Volume:5’0″: 28L | 5’6″: 33.5L | 6’0″: 40L -
Softech Sally Fitzgibbons Signature
$ 453.95Wide, stable and easy to paddle. Perfect for beginners having their first waves riding experience.
Size: 6’0″, 6’6″, 7’0″
Dimensions: 6’6″ x 22 1/5″ x 3″ , 7’0″ x 22 1/4″ x 3 1/7″
Core: 100% Waterproof X-Density EPS Foam Core
Stringer: Single stringer
Fin Setup: Tri (x3 Fin Setup)
Fin System: VFS
Volume: 6’0″: 54L | 6’6″: 61L | 7’0″: 66L -
Softech The Middie
$ 453.95A well rounded board. Suited to all-round conditions or for beginners looking for an easier way to catch waves.
Size: 5’10” / 6’4″ / 6’10”
Dimensions: 5’10” x 20″ x 2 ¼”, 6’4″ x 21″ x 2 ½” , 6’10” x 21″ x 2 ¾”
Core: Epoxy Core
Stringer: Single Stringer
Fin Setup: Tri (x3 FCS II Fin Setup)
Fin System: FCS II
Volume: 5’10”: 28.5L | 6’4″: 37.5L | 6’10”: 45.5L -
Softech The Triplet
$ 434.50 – $ 453.95A combo of fresh and old school. The perfect board for fast and steezy surfing.
Size: 5’8″ / 6’0″ / 6’3″
Dimensions: 5’8″ x 20 1/2” x 2 7/16”, 6’0″ x 21 1/8” x 2 3/8”, 6’3″ x 21 1/4” x 2 3/4”
Core: Epoxy Core
Stringer: Single Stringer
Fin Setup: Tri (x3 FCS II Fin Setup)
Fin System: FCS II
Volume: 5’8″: 29.5L | 6’0″: 35L | 6’3″: 38.25L -
Softech VFS Soft Tri Fin Set
$ 42.15Reliable template made from a flexible Softflex material. Safe, durable and ideal for learners.
Related products
-
Hurricane Equiliser
$ 551.23The perfect all rounder, designed to suit most wave conditions. A smooth, low entry rocker with a reliable single to double concave and “flipped out” tail. The mild hip allows for pivot while a slightly wider tail keeps it explosive off the lip.
-
Hurricane Cracker
$ 551.23Dimensions 5’10” x 19″ x 2 7/6″ 28.5L
Low entry with an exaggerated curve through the tail. Single to double concave with a subtle flick for extra release. Verticle in the pocket and super snappy!
-
M*A*T Target
$ 680.00Dimensions 5’6″ x 18 1/4″ x 2 1/4″ – 24.25LAbility: Intermediate to expert; Ideal wave size: 2 to 6 ft; Wave type: All conditions; Stock glassing: Deck 4x4oz / Bottom 4oz; Rocker: Higher entry rocker and medium exit ; Concave: Deep Single; Carbon: Carbon reinforced fin’s & tail; Fins: FCS II or FuturesSpeed power and flow… critical maneuver in the critical part of the wave? This ticks the high performance boxes in all conditions – round or squash tail. -
M*A*T Tripster
$ 680.00Dimensions 5’8″ x 18 3/4″ x 2 3/8″ – 27.2LAbility: Intermediate to expert; Ideal wave size: 3 to 8 ft; Wave type: All conditions; Stock glassing: Deck 4x6oz / Bottom 6oz; Rocker: Medium to low ; Concave: Deep single to slight double concave; Carbon: Carbon Reinforced Fin’s & Tail; Fins: FCS II or FuturesGoing on a trip? Or not? This is your one board quiver for everyday use – round squash or swallow from weak waves to hollow, take your pick. -
Sharp Eye Maguro
$ 850.00Everyday Performance
MAGURO It means, “blue fin tuna” in Japanese. One of the fastest fish in the ocean. This is our latest small wave design following the modern 2 concept. The Sharp Eye Maguro was designed as a mix between the classic San Diego fish and a modern twin. The tail is a classic swallow (split tail) with 5” deep and 10” wide.
This characteristic creates a sharp turning tail with a good amount of drive and hold. The bottom is a classic vee all the way to the tail; the deck is flat with a modern soft rail; the rocker/ foil combo was improved if compared with the traditional 70’s fish to allow the surfer to carve classic lines or to rip like a high performance small wave design. The Maguro was designed in two versions., The classic twin keel or as a quad. It should be ridden 3 to 4 inches smaller than your height.
-
Sharp Eye Inferno 72
$ 850.00Stab in the Dark – WINNER.
The Sharp Eye Inferno 72 is the model Sharp eye Surfboards built for the 2021 Stab in the Dark contest. This board is a PU/PE replica of the Dark Arts Epoxy board that took the win.
The Inferno 72 was originally designed for Filipe Toledo to compete on at “The Rumble at the Ranch” competition in 2020. Filipe ended up winning the comp. When Sharpeye shaper Marcio Zouvi was approached by Stab to enter the Dark Arts edition he chose to supply the Inferno 72.
The Inferno 72 is a tuned up version of the Disco Inferno, a tried and tested QS favourite. We have added more rocker in the entry and exit for more hold through turns and drive.
It’s going to surf its best in small to medium waves and just like the Disco Inferno the Inferno 72 is a performance surfboard that will handle just about all conditions thrown at it and maintain its spark.